Product Description; Identification - Riello 7200 Kombisolar 3S Installation, Operation And Maintenance Manual

Table of Contents

Advertisement

Product description

PRODUCT DESCRIPTION
7200 Kombisolar 3S triple coil combination storage
cylinders come in the form of an inertial (buffer) storage
cylinder with three internal coils. The bottom coil receives
heat from the solar circuit while the top coil receives heat
from the boiler. A third coil in stainless steel produces
domestic hot water.
The most important technical features of these combina-
tion storage cylinders are:
- The cylinder and coils are specially designed and sha-
ped for optimum performance in terms of stratification,
heat exchange and replenishment times.
- The stainless steel, rapid heat exchange coil for dome-
stic hot water production is bacteriologically inert and
guarantees maximum hygiene and reduced lime scale
deposits.

Identification

IDENTIFICATION
r 7200 Kombisolar 3S combination storage cylinders are identified by three plates:
– Data plate
This lists the technical specifications and
performance of the product.
COMBINATION STORAGE CYLINDER - KOMBISPEICHER
Model
Modell
Code
COMBINATION STORAGE CYLINDER - KOMBISPEICHER
Bestellnummer
DHW coil capacity
Model
Inhalt der Warmwasserwendel
Modell
Inertial storage cylinder capacity
Inhalt des Pufferspeichers
Code
Bestellnummer
Power absorbed by top coil [Primary T = 80°C]
Leistungsaufnahme obere Rohrwendel [T Primärkreis 80°C]
DHW coil capacity
DHW production, continuous draw
Inhalt der Warmwasserwendel
Warmwasserbereitung bei durchgehender Anzapfung
Inertial storage cylinder capacity
Maximum working pressure (DHW)
Inhalt des Pufferspeichers
Max. Druck Warmwasserbetrieb
Power absorbed by top coil [Primary T = 80°C]
Maximum working temperature (DHW)
Leistungsaufnahme obere Rohrwendel [T Primärkreis 80°C]
Max. Temp. Warmwasserbetrieb
DHW production, continuous draw
Warmwasserbereitung bei durchgehender Anzapfung
Maximum working pressure of inertial storage cylinder
Max. Druck Pufferspeicher-Betrieb
Maximum working pressure (DHW)
Maximum working temperature of inertial storage cylinder
Max. Druck Warmwasserbetrieb
Max. Temp. Pufferspeicher-Betrieb
Maximum working temperature (DHW)
Electrical consumption
Max. Temp. Warmwasserbetrieb
Stromaufnahme
Maximum working pressure of inertial storage cylinder
Power supply
Max. Druck Pufferspeicher-Betrieb
Stromversorgung
Maximum working temperature of inertial storage cylinder
Obligatory ground connection - Erdschluss ist Vorschrift
Max. Temp. Pufferspeicher-Betrieb
Electrical consumption
Stromaufnahme
Power supply
Stromversorgung
Obligatory ground connection - Erdschluss ist Vorschrift
Serial number
Seriennummer
Model
Modell
Serial number
Seriennummer
Model
Modell
– Serial number plate
This specifies the serial number, model,
consumption and capacity.
6
GENERAL
RIELLO S.p.A.
Via Ing.Pilade Riello 7
37045 Legnago (VR) - ITALY
T067730ED
RIELLO S.p.A.
Serial number
Via Ing.Pilade Riello 7
Seriennummer
37045 Legnago (VR) - ITALY
Year of manufacture
T067730ED
Baujahr
Serial number
l
Seriennummer
l
Year of manufacture
Baujahr
kW
[
T 35°C]
l
l/h
[
T 35°C]
l
bar
kW
°C
[
T 35°C]
l/h
[
T 35°C]
bar
bar
°C
°C
W
bar
V-Hz
°C
W
V-Hz
RIELLO S.p.A.
Via Ing.Pilade Riello 7
37045 Legnago (VR) - ITALY
Power absorbed by top coil
kW
Leist.aufn. o. Wendel
RIELLO S.p.A.
DHW prod., cont. draw
l/h
Via Ing.Pilade Riello 7
WW-Bereitung durchg. Anzapfung
37045 Legnago (VR) - ITALY
Power absorbed by top coil
kW
Leist.aufn. o. Wendel
DHW prod., cont. draw
l/h
WW-Bereitung durchg. Anzapfung
- Water fittings are available at different heights, permit-
ting different boilers to be used without reducing the
stratification effect.
- CFC-free polyurethane insulation and an elegant exter-
nal casing reduce heat loss and improve efficiency.
- Excellent flexibility permits use in both high and low
temperature systems.
- Dimensions are extremely compact thanks to the clever
combination of an inertial storage cylinder and dome-
stic hot water coil.
7200 Kombisolar 3S triple coil combination storage
cylinders can be connected to a special solar controller
and can be integrated in solar heating systems in which
r boilers or water heaters serve as auxiliary heat
generators.
– Product identification plate
This states the name of the product.
b
If these plates or any other means of clearly identifying
the product are defaced, removed or lost, proper
installation and servicing may be rendered difficult.

Advertisement

Table of Contents
loading

Table of Contents