Electromagnetic Compatibility
For EMC compliance, operate this device with double-shielded cables.
Note
CE Compliance
Refer to the Declaration of Conformity (DoC) for this product for any additional
Note
regulatory compliance information. To obtain the DoC for this product, visit
certification
in the Certification column.
Environmental Management
EU Customers
center. For more information about WEEE recycling centers and National Instruments
WEEE initiatives, visit
National Instruments
(For information about China RoHS compliance, go to
© National Instruments Corporation
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
•
EN 61326 EMC requirements; Minimum Immunity
•
EN 55011 Emissions; Group 1, Class A
•
CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
•
2006/95/EC; Low-Voltage Directive (safety)
•
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
, search by model number or product line, and click the appropriate link
National Instruments is committed to designing and manufacturing
products in an environmentally responsible manner. NI recognizes that
eliminating certain hazardous substances from our products is beneficial
not only to the environment but also to NI customers.
For additional environmental information, refer to the NI and the
Environment Web page at
environmental regulations and directives with which NI complies, as well
as other environmental information not included in this document.
Waste Electrical and Electronic Equipment (WEEE)
At the end of their life cycle, all products must be sent to a WEEE recycling
ni.com/environment/weee.htm
National Instruments
RoHS
ni.com/environment
ni.com/environment/rohs_china
ni.com/environment/rohs_china
23
NI USB-9211/9211A User Guide and Specifications
ni.com/
. This page contains the
.
RoHS
(RoHS)
.)