Assembling The High Voltage Screw Terminal Backshell - National Instruments USB-9211A User Manual

Assembling the High Voltage Screw Terminal Backshell

© National Instruments Corporation
The NI 9932 high voltage screw terminal backshell must be installed when
using hazardous voltages (>42.4 V
completing the following steps to assemble the backshell:
1. Connect the leads to the screw terminal and secure with the strain
relief.
2. Finish by snapping the backshell around the connector.
1 Strain Relief
Figure 7. High Voltage Screw Terminal Backshell
Figure 8. Assembled High Voltage Screw Terminal Backshell
, 60 VDC). Refer to Figure 7 while
pk
13 NI USB-9211/9211A User Guide and Specifications
1