Led Indicator - National Instruments USB-9211A User Manual

Mounting the NI USB-9211/9211A to a Panel
Connecting the NI USB-9211/9211A to a Computer

LED Indicator

NI USB-9211/9211A User Guide and Specifications
Threaded inserts are located in the NI USB-9211/9211A for mounting it to
a panel. Refer to Figure 5 for dimensions.
85.7 mm
(3.37 in.)
72.2 mm
(2.84 in.)
Figure 5. Module Dimensions in Millimeters (Inches)
Plug one end of the USB cable into the NI USB-9211/9211A and the other
end into an available USB port on the computer.
The NI USB-9211/9211A device has a green LED next to the USB
connector. The LED indicator indicates device status, as listed in Table 2.
When the device is connected to a USB port, the LED blinks steadily to
indicate that the device is initialized and is receiving power from the
connection.
If the LED is not blinking, it may mean that the device is not initialized or
the computer is in standby mode. In order for the device to be recognized,
the device must be connected to a computer that has
NI-DAQmx/NI-DAQmx Base installed on it. If your device is not blinking,
make sure your computer has the latest version of
NI-DAQmx/NI-DAQmx Base installed on it, and the computer is not in
standby mode.
Threaded Insert
M3 x 0.58.5 mm (0.34 in.)
Max Depth
76.1 mm
(3.00 in.)
10 ni.com