Table of Contents
Advertisement
7.2.
Connecting a LAN
The LAN connection is used when Modbus communication is performed using Modbus/TCP.
Insert one end of a commercially available LAN cable into the LAN connector located on the control box. And insert
the other end of the cable into the LAN connector on a Modbus master device or into the Ethernet hub connected to a
Modbus master device.
Note:
When Modbus communication is to be performed using Modbus/TCP, LAN settings on the checkweigher are
required.
For details about LAN settings, refer to "5.4. Setting LAN."
7.3.
Connecting a Printer
A printer is used to print graphs and summary results.
For printer connection, two methods are available, LAN connection and USB connection.
Note
・ For printing, a PostScript printer is required.
・ When connecting a printer on LAN, inquire your system administrator.
・ For information on IP address setting to the printer, refer to the printer manual.
・ When using a printer, set LAN settings, printer IP address (only for LAN connection) and printer connection
method.
・ For details on LAN setting, refer to "5.4. Setting LAN."
・ For details on printer IP address and connection method, refer to "8.16.3. Printer IP address" and "8.16.4. Printer
connection method."
7.3.1.
LAN connection
Insert one end of a commercially available LAN cable into the LAN connector located on the control box. And insert
the other end of the cable into the LAN connector on a printer or into the Ethernet hub connected to a printer.
7.3.2.
USB connection
Insert one end of a commercially available USB cable into the USB terminal located on the display. And insert the
other end of the cable into the USB connector on a printer.
67
Hide quick links:
Advertisement
Table of Contents
