Part
Disassembling the
Assy basket & tub of
Upper washer
20 _ Removal and Reassembly
Figure
1. Open the door and remove the diaphragm as
2. Remove 3 screws and detach Door lock s/w.
3. Tilt the set slightly backwardsRemove two
4. Remove 4 screws at the top of the frame front.
5. Use the tool to detach the two hooks, then
6. Remove 9 screws and disassemble by pulling
7. Remove the four screws and pull the part
Description
shown.
screws at the bottom.
move the frame front forward Pull it off.
the part forward.
forward to remove it.