Part
Disassembling the
Pump Motor Part
Removing the
Remaining Water
Figure
1. Remove the 2 screws holding the ASSY PUMP
2. Separate the Clamp of the hose connected to
3. Separate the Clamp of the hose connected to
4. Separate the Clamp of the hose connected to
5. Separate the wire connected to the PUMP.
1. If the washing machine works, drain the water
Description
DRAIN.
the PUMP and then pull the DRAIN-HOSE.
the PUMP and then pull the HOSE-AIR.
the PUMP and then pull the HOSE-DRAIN.
in the wash tub by selecting the Spin course. If
the washing machine does not work, remove
the laundry from the wash tub and scoop the
remaining water out of the tub using a cup.
Removal and Reassembly _ 19