Samsung WV55M9600AV Service Manual page 18

Part
Separating the Main
PCB
16 _ Removal and Reassembly
Figure
1. Remove the 2 screws holding the ASSY PCB-
2. Separate the 2 Hooks by pushing it rightwards.
3. Remove the 2 screw and 2 Connectors for
4. Push the TUB upside to separate ASSY PCB-
5. Separate the 4 Hooks.
6. Disconnect All Connectors on main PBA.
Description
MAIN at the back of the washing machine.
separating Guide Wire-T
MAIN. and separate the ASSY PCB-MAIN
lifting it up.
Lift up Main PBA, Change SVC Part. After
SVC, Certainly check the all Hooks on COVER-
PCB(M) Otherwise COVER-PCB(M) will be
disassembled during washing machine
running.