Problem solving guide
Problem
In the timer display
flashes alternately with
numbers.
46
Cause and remedy
The overheating protection mechanism has been ac-
tivated.
See "Safety features" – "Overheating protection".
, or
The fan is blocked or defective.
Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.
If this fault code continues to appear in the dis-
play, contact Miele Service.
and other numbers
There is a fault in the electronic module.
Interrupt the power supply to the SmartLine ele-
ment for approx. 1 minute.
If the problem persists after power has been re-
stored, please contact Miele Service.
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.