Table of Contents
Advertisement
Actiontec USB/Ethernet DSL Gateway User Manual
7. The "Local Area Connection Properties" window appears. Click General.
8. In the "Components checked are used by this connection" list box, double-
click Internet Protocol (
9. The "Internet Protocol (
10. In the General tab, make sure the circle next to "Use the following
" is selected. When active, a black dot appears in the circle. If the circle already
contains a black dot, leave it alone.
11. Enter the following address in the "
Enter the periods in the address by pressing the space bar on the keyboard.
).
TCP/IP
) Properties" window appears.
TCP/IP
IP
192.168.0.2
94
Address" text box:
Address
IP
Advertisement
Table of Contents
