Table of Contents
Advertisement
Actiontec strongly recommends leaving the
Server option is Off, ensure the
on the same subnet as the
"
Server Configuration."
DHCP
DHCP Server Configuration
Clicking Next in the "
the "
Server Configuration" screen. Change
DHCP
information here.
Beginning IP Address
The "Beginning
assigning
addresses. Actiontec recommends keeping the factory default setting
IP
(192.168.0.2).
Ending IP Address
The "Ending
IP
assigning
addresses. Actiontec recommends keeping the factory default set-
IP
tings (192.168.0.254).
The beginning and ending
Gateway. If the default values are left intact, the Gateway supplies a unique
address between 192.168.0.2 and 192.168.0.254 to each computer on the net-
work. Note that the first three groups of numbers of the addresses are identical;
this means they are on the same subnet. The
be on the same subnet as the
Gateway's
address is changed to 10.33.222.1, set the beginning
IP
10.33.222.2, and the ending
Chapter 4 Using Advanced Setup
addresses of the networked computers are
IP
address of the Gateway. For more information, see
IP
Server" screen (if the
DHCP
Address" is the
IP
Address" is the
IP
addresses define the
IP
address range it generates. For instance, if the
IP
address to 10.33.222.254.
IP
Server option On. If the
DHCP
DHCP
address range and
IP
address at which the
IP
Address at which the
IP
address of the Gateway must
IP
43
server is activated) generates
DNS
server starts
DHCP
Server stops
DHCP
address range of the
address to
IP
DHCP
server
IP
Advertisement
Table of Contents
