ActionTec DSL GATEWAY GT704 User Manual page 113

Usb/ethernet dsl gateway
Hide thumbs Also See for DSL GATEWAY GT704:
Table of Contents

Advertisement

Actiontec USB/Ethernet DSL Gateway User Manual
2. When the "
TCP/IP
User Mode.
3. When the "User Mode" window appears, select Advanced, then click
4. In the "
TCP/IP
list.
5. Select Using
DHCP
6. Ensure the "Use 802.3" option is not checked.
7. Disregard any addresses in the
when the first connection is made.
8. Click Options and when the "
Ensure the "Load only when needed" option is not checked, then click
9. Close the "
TCP/IP
10. Restart the computer. The
To finish setting up the computer to connect with the Gateway, follow the instruc-
tions in chapter 3, "Performing a Basic Setup," on page 33.
" window appears, select Edit from menu bar, then select
" window, select Ethernet from the "Connect via" drop-down
Server from the "Configure" drop-down list.
IP
TCP/IP
" window and when prompted to save changes, click Save.
TCP/IP
Address text boxes. They will be reacquired
Options" window appears, select Active.
settings are configured.
110
.
OK
.
OK

Advertisement

Table of Contents
loading

Table of Contents