Nat (Network Address Translation); Static Routing - ActionTec DSL GATEWAY GT704 User Manual

Actiontec USB/Ethernet DSL Gateway User Manual

NAT (Network Address Translation)

Selecting in the "Configuring the Advanced Settings" screen generates the
NAT
" " screen. The Gateway's basic firewall security is based on . Disabling
NAT NAT NAT
allows the computers connected to the Gateway to be accessed by outside parties.
Do not turn off unless instructed to do so by the .
NAT ISP

Static Routing

Selecting Static Routing in the "Configuring the Advanced Settings" screen gener-
ates the "Static Routing" screen. Enter the addresses in their respective text boxes,
then click Add. The address will appear in the "Static Routing Table." To remove
an address, highlight it by clicking on it in the Static Routing Table, then click
Remove.
52