Door Switch Removal And Replacement Instructions - EdgeStar DWP62BL Service Manual

Door Switch Removal and Replacement Instructions

The door switch signals to the circuit board that the door is closed properly and the unit can begin a cycle.
A failing switch may lead to an error code, failure to turn on, or it may even allow the unit to run without
the door closed properly.
Tools Needed:
- Phillips Screwdriver
Step 1: Remove the Outer Shell

Remove the eight (8) screws as indicated in the below image. Set screws aside

Lift up on the outer shell and unlatch from the front of the unit. Set outer shell aside
- Flat Tip Screwdriver - Needle nose pliers
50