Power Cord Removal And Replacement Instructions - EdgeStar DWP62BL Service Manual

Power Cord Removal and Replacement Instructions

The air breaker functions to supply water for wash and rinse while preventing siphoning or back-flow of
wash water into the water supply. It also functions to supply air venting to aid in dish drying.
Tools and Parts Needed:
- Phillips Screwdriver
Step 1: Remove Base Tray Cover

Refer to instructions to remove panel found in the "Drain Pump Removal and Replacement"
section of this document
Step 2: Locate the Connector Bracket
Step 3:Remove Crimp Connectors and Disconnect Power Cord Wiring

Remove three (3) Crimp Connectors that are seated into the Connector Bracket.
o

Turn the pump clockwise until the locking latch clicks and the pump is locked in place.
- Flat Tip Screwdriver - Needle nose pliers
18