EdgeStar DWP62BL Service Manual page 38

Step 5: Remove and replace the Heating Element

Use an 8mm socket to remove the nut on the heating element

Slide the heating element out of the housing
NOTE: The replacement heating element will come with a new housing. If you have not damaged the original
housing, it is easier to remove and replace just the element.

Slide the new heating element into place

Use an 8mm socket to install the securing nut
Step 6: Reconnect the electrical connections

Reinstall the electrical connectors on the back of the heating element
VERY IMPORTANT: Refer back to the pictures taken in step 4 to properly reconnect the electrical
connections in the original order.
37