GYE18J, PYE18H, GFE24J, PFE24J, CFE24S, PFE24H, GFE26J External Control
Freezer Compartment Temperature Control
temperature is preset in the factory at 0°F (-17.8°C).
preset recommended setting.
Fresh Food Compartment Temperature Control
fresh food temperature is preset in the factory at 37°F
the preset recommended setting.
To set the TurboCool™, press the Alarm
seconds. The display will show tc.
TurboCool™ rapidly cools the refrigerator
compartment in order to more quickly cool foods. Use
TurboCool™ when adding a large amount of the food
to the refrigerator compartment, putting away foods
after they have been sitting out at room temperature,
or when putting away warm leftovers. It can also be
used if the refrigerator has been without power for an
NOTE: The refrigerator is shipped with protective film covering the temperature controls.
If this film was not removed during installation, remove it now.
Models with Figure B controls
Models with Figure C controls
(on some models)
NOTE: The refrigerator temperature cannot
be changed during TurboCool™
temperature is not affected during TurboCool. When
opening the refrigerator door during TurboCool™, the
fans will continue to run if they have cycled on.
Press the Alarm pad to toggle the door alarm between
off and on. The alarm will sound if either door is left
open for more than 2 minutes. The beeping stops
when you close the door.
Press and hold the Lock
ice and water dispenser and all other controls. Press
and hold to unlock the controls.
LED dispenser Light
Press the Light pad to turn your dispenser light on and
NOTE: To put the refrigerator control in the OFF
position, simultaneously touch the words Freezer and
be disconnected by any setting on the control panel.
Changing °F to °C or °C to °F: Press and hold the
Power to the refrigerator cannot