Hoover MAX Extract Quick Assembly Manual

1. CLEANER ASSEMBLY
CARTON CONTENTS
UPPER TANK
1.4 Position bottom of tank onto cleaner.
STORE HOSE
A. Base, Hose and Removable Dirty
Water Tank
B. Upper Handle
C. Handle Bolt (located in handle of unit)
D. SpinScrub® 60 Brush Assembly or
SpinScrub® 77 Brush Assembly
(Assembled on unit)
E. Stair/Upholstery Nozzle
(Assembled on unit)
F. SpinScrub® Hand T ool*
G. Clean Water Tank! Carry
Handle
H. Squeegee* (Assembled on unit)
I. Solution Bottle
Remove all parts from carton and
identify each item shown.
Make sure all parts are located before
disposing of packing materials.
Available on select models only.
Accessories not included with your
model may be purchased separately by
visiting hoover.com.
NOTE: Phillips screwdriver needed for
assembly.
ATTACH HANDLE
Handle ships with bolt screwed in place. Remove bolt.
MAX
Extract
QUICK ASSEMBLY GUIDE
GUIDE D'ASSEMBLAGE RAPIDE • GUIA DE ENSAMBLAJE RAPIDA
Unfold this sheet for quick assembly Instructions.
Dépllez ce feulliet pour consulter lea Instructions d'assembiage rapide.
Abra esta hoja pars instrucciones de ensamblaje rápidas.
1.5 Push upper part of tank to lock it
into place.
CORD STORAGE
1.2 Insert handle section into vcuum
base.Push down firmly.
1.6 Wrap hose around back of cleaner.
Store hose handle in holster.
STORE TOOLS
(Tools may vary)
1.8 Store Tools on back side of cleaner
as shown.
A. Upholstery No zzle*
B. SpinScrub® Hand
Tool*
C. Hard Floor
Squeegee Tool*
Available on select models only.
1.7 Wrap cod around cord hooks for
convenient storage. Attach the plug
end to cord.
1.3 Insert bolt. Tighten with screwdriver.