Power Function And Super Power Function; Timer Function - Novy 1801 Operation Instructions Manual


WARNING: As long as the residual heat indication
remains active, the cooking zone(s) must not be
touched and no heat-sensitive items should be
placed on the cooking zone. Risk of fire and burns.

5.3.4 Power function and Super Power function

The Power function and Super Power
P
power rating of the selected cooking zone. If this function is
activated, these cooking zones will be subjected to considerably
higher power for 10 minutes.
The Power function is designed to quickly heat large quantities
of water, for pasta for example.
Switching Power on and off:
Switch on power
Glide your finger over the slider to the end or
push the end of the slider
Switch off Power
Glide your finger over the slider
Switching Super Power on and off:
Switch on power
Glide your finger over the slider to the end or
push the end of the slider
Switch on Super Power
Press the end of the slider again
Switch off Super Power
Glide your finger over the slider
Switch off Power
Glide your finger over the slider
Management of maximum power:
The hob is divided into 2 separate heating groups.
B2
B1
8 8
B2 B1
If this power limit is exceeded when switching to a high
selected cooking heat or switching the power function on, the
power management module reduces the cooking position of
the relevant cooking zone. This cooking zone will first flash,
and it is then automatically reduced to the maximum possible
cooking heat
The maximum individual power for each zone is 3700 W.
If simultaneous cooking is taking place on zones A1 and A2 or B1
and B2, the power of 3700 W is divided between these 2 zones
A1 and A2 or B1 and B2.
Cooking zone
A1
increases the
A2
B1
B2
Power limit
Selected cooking zone with Power function
Power limit activated
Display
[9] reduced to [8] and flashes
P
In order to be able to make use of the maximum possible power
for 2 zones at the same time, use a combination of zone A1 or
9‐0
A2 and B1 or B2.

5.3.5 Timer function

Display
The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 99 minutes)
P
for each zone.
+ P
Setting or changing the cooking time
Select the power by gliding your finger over the
P‐0
slider
Select the timer
9‐0
Press
and if necessary press simultaneously again
until the hourglass of the relevant zone is
highlighted
Reduce the time
press
A2
Increase the time
press
A1
After a few seconds the LED no longer flashes [ min ]. The time
has been selected and the countdown has begun.
8 8 8
8 8
min
A2 A1
– 63 –
in cm
Power (W)
24 x 20
Normal: 2100
24 x 20
Power: 3000
24 x 20
Super power: 3700
24 x 20
Timer function
‐ and + on the timer at the same time
‐
on the timer
+ on the timer
Display
P
8
Display
1‐P
060‐
059...
001‐
002...