Table of Contents
Advertisement
Available languages
Available languages
4.1.6 Timer function
The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 99 minutes)
for each zone.
Timer function
Setting or changing the cooking time
Press the cooking zone selection button
Press
‐
and
+
at the same time.
Select the timer
Press
‐
and
+
at the same time.
Reduce the time
Press
‐
on the timer
Increase the time
Press
+
on the timer
A point next to the power level display of the selected zone
lights up to show the activation of the timer.
The time has been selected and the countdown has begun.
Switch off the timer function
Select the timer
Press the cooking zone selection button
Press
‐
and
+
at the same time.
Stop the timer
Keep pressing
‐
on the timer until the timer
displays
00
The timer can also be used as an independent cooking alarm
without selecting a cooking zone. If the hob is to be switched
off, the independent cooking timer will continue until the end of
the set time.
Using the timer without cooking
Timer without cooking
Switch on the hob
Press
for 2 seconds
Select the time
Press
‐
and
+
simultaneously
Reduce the time
Press
‐
on the timer
Increase the time
+
Press
on the timer
The time has been selected and the countdown has begun.
Turn off automatically at the end of the cooking time:
As soon as the selected cooking time is complete, the display
will flash
turn off. To stop the buzzer and flashing light, press a control
button.
4.1.7 Manual Bridge function
Display
This function allows you to link the 2 left and 2 right zones so
.
they operate as 2 large zones. This function can be activated
1‐P
manually a large pot/pan be placed on the cooking surface.
00
Manual activation
60‐
Simultaneously press on both cooking zone
selection buttons
59...
A2 or B1, B2 to be linked.
01‐
Increase the power
02...
Press the
Switch bridge function off
Simultaneously press on both cooking zone
selection buttons
4.1.8 Locking the controller
To avoid a hob selection being changed, during cleaning for
Display
example, the controller must be locked (except the on/off
The lamp
.
button).
for that zone
lights up
Lock
00
1. Switch the hob on using the
2. Press the
3. Press the
Unlock:
1. Switch the hob on using the
2. Press the
Display
3. Press the
00
60‐
59...
01‐
02...
– 61 –
, a beep will be heard, and the cooking zone will
00
Bridge function
+
of the zones A1,
+
or
‐
button
of both linked zones.
Locking
‐
and
buttons of the right
front zone simultaneously.
button of the front right zone
again.
‐
and
buttons of the right
front zone simultaneously.
‐
button again.
Display
0
0‐9
0
Display
button.
L
button.
0
Advertisement
Chapters
Table of Contents
