Description And Use Of The Controls; Upper Panel - Smeg STA4645 Instruction Manual

USER INSTRUCTIONS
2

DESCRIPTION AND USE OF THE CONTROLS

2.1

Upper panel

All the dishwasher controls are grouped on the upper panel (see fi g. 2-01). The
dishwasher can only be switched on, programmed, switched off, etc. with the
door open.
A brief description (see tab. 2-01) of the various controls on the upper panel is
given below.
On/off button
1
Press to power the appliance.
Program indicator lights
2
These show which program is selected and whether there are any faults (troubleshooting).
Program selection button
3
Press in sequence to select the required program.
Add salt indicator light (only fi tted on some models)
4
Shows the appliance has run out of salt.
Add rinse-aid indicator light (only fi tted on some models)
5
Shows the appliance has run out of rinse-aid.
Sanitation indicator light
6
Shows the function is active.
Program delay button (only fi tted on some models)
7
Press to delay the start of the program up to 9 hours.
8 Display (only fi tted on some models)
Rev 0.0
EN
Fig. 2-01
Tab. 2-01
5