Description Of The Controls - Smeg STE8639L Instruction Manual

1. Description of the controls

1.1

All the dishwasher controls are grouped on the upper panel. Switch-on,

programming, switch-off, etc. procedures are only possible when the door is open.

The panel shown is only a guideline example: the form of the lights and

buttons may vary depending on the model.

User instructions

Upper panel

ON/OFF BUTTON

Press this button to switch the dishwasher on/off.

SELECTED PROGRAM INDICATOR LIGHTS

Illumination of this light denotes the program selected and the

occurrence of a fault

PROGRAM SELECTION BUTTON



+ ADJUSTING THE WATER SOFTENING SYSTEM

Used to select the washing program required and adjust the water

softening system.

WATER HARDNESS ADJUSTMENT ON INDICATOR LIGHT

The light flashes to indicate that the appliance is in "water hardness

adjustment" mode.

SALT WARNING LIGHT

If the

symbol is present, illumination of this light denotes a

regenerating salt warning level.

RINSE AID WARNING LIGHT

Illumination of this light denotes a rinse aid warning level in the tank.

(troubleshooting).

Table of Contents