Smeg STA4645 Instruction Manual
  1. Manuals
  2. Brands
  3. Smeg Manuals
  4. Dishwasher
  5. STA4645
  6. Instruction manual

Smeg STA4645 Instruction Manual

Smeg dishwasher instruction manual
Hide thumbs Also See for STA4645:
Table of Contents

Advertisement

Quick Links

INSTRUCTION MANUAL
G
U
I
D
E
F
O
R
U
S
I
N
G
T
H
E
D
I
S
H
W
A
S
H
E
R
A
N
D
T
H
E
W
A
S
H
I
N
G
P
R
O
G
R
A
M
S
G
U
I
D
E
F
O
R
U
S
I
N
G
T
H
E
D
I
S
H
W
A
S
H
E
R
A
N
D
T
H
E
W
A
S
H
I
N
G
P
R
O
G
R
A
M
S

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STA4645 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Smeg STA4645

Summary of Contents for Smeg STA4645

  • Page 1 INSTRUCTION MANUAL...

  • Page 2: Table Of Contents

    CONTENTS CONTENTS INTRODUCTION ... 3 DESCRIPTION AND USE OF THE CONTROLS ... 5 Upper panel ... 5 Setting the washing program and switching on and off... 6 2.2.1 Switching on ... 8 2.2.2 Selecting and starting the program ... 8 2.2.3 End of program ...
  • Page 3 Rev 0.0...

  • Page 4: Introduction

    INTRODUCTION INTRODUCTION Thank you for choosing one of our products. To use this dishwasher correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to all your ap- pliance’s functions. The texts are easy to understand and are com- plete with detailed illustrations.
  • Page 5 Symbols used in this manual (see tab. 1-01) DANGER. This symbol highlights information and warnings which, if not observed, may compromise personal safety or damage the appliance. This symbol highlights general information and warnings. INTRODUCTION Tab. 1-01 Rev 0.0...

  • Page 6: Description And Use Of The Controls

    USER INSTRUCTIONS DESCRIPTION AND USE OF THE CONTROLS Upper panel All the dishwasher controls are grouped on the upper panel (see fi g. 2-01). The dishwasher can only be switched on, programmed, switched off, etc. with the door open. A brief description (see tab. 2-01) of the various controls on the upper panel is given below.

  • Page 7: Setting The Washing Program And Switching On And Off

    Setting the washing program and switching on and off The dishwasher is equipped with a control panel (see fi g. 2-02) which is used to program the appliance and switch it on and off. To select the most suitable program for the dishes to wash, consult the fol- lowing table which specifi...
  • Page 8 - Only “EXTREME WASH” program conform to NSF std 184 and is certifi ed by INTERTEK with the ETL SANITATION LISTED. - When the “Sanitized” light shine it means that the dishwasher and its contents have been sani- tized according to the requirements of the National Sanitation Foundation (NSF).

  • Page 9: Switching On

    The dishwasher door is securely closed. 2.2.1 Switching on Press the on/off button (ref. 1 fi g. 2-02) to start the dishwasher. Then wait for one of the program indicator lights to turn on (ref. 2 fi g. 2-02). 2.2.2 Selecting and starting the program •...

  • Page 10: Interrupting A Program

    USER INSTRUCTIONS 2.2.4 Interrupting a program To interrupt the current program simply open the door of the dishwasher; to restart the program, simply close the door again. The program restarts from where it was interrupted. If it is necessary to open the door during the washing cycle, the program will be interrupted, the relative indicator light will continue to fl...

  • Page 11: Options

    The “Program delay” function delays the beginning of the washing program up to 9 hours from the moment in which programming takes place. This makes it possible to use the dishwasher at a certain time of day. Before programming a delay, open the door of the dishwasher, select the required washing program (see para 2.2 “Setting the washing program and...

  • Page 12: Switching Off

    2.2.8 Switching off At the end of the program, the dishwasher emits a short beep and the indica- tor lights of the fourth and fi fth program (ref. pr. 4, pr. 5 fi g. 2-04) fl ash. Turn off the appliance by opening the door and pressing the on/off button (ref.
  • Page 13 N.B.: the display indicates the water hardness adjustment and the program delay. A dot (.) after the number means that the water hard- ness adjustment is being displayed. If no dot (.) appears, the pro- gram delay is being displayed. Water hardness table (see tab.

  • Page 14: Energy Saving And Environmental Respect

    Use the most suitable washing program for each type of load. • Do not pre-rinse. • If available, connect the dishwasher to a hot water system with a tempera- ture of up to 60°C (140°F). • When possible, skip the drying cycle by opening the door after washing: the air and the residue heat will dry the dishes to perfection.

  • Page 15: Removing The Dishes

    REMOVING THE DISHES At the end of the washing program, wait at least 20 minute before removing the dishes in order to allow them to cool. To prevent any water droplets on the upper rack from falling onto the dishes in the lower rack, empty the lower rack fi...

  • Page 16: Troubleshooting

    USER INSTRUCTIONS TROUBLESHOOTING The dishwasher can to signal a number of malfunctions by turning on various indicator lights, as described below (see following table): FAULT Light off Rev 0.0 DESCRIPTION Acquastop failure The anti-fl ooding system has tripped (only for models fi...
  • Page 17 If an alarm situation occurs, the dishwasher interrupts the current program and signals the fault. • Alarms E1, E3, E4, immediately terminate the current program. • Alarms E5, E6 interrupt the current program and, after the problem has been eliminated, resume the cycle.
  • Page 18 CONTENTS Contents INTRODUCTION ... 3 IMPORTANT SAFETY INSTRUCTION ... 5 INSTALLATION AND HOOK-UP ... 11 OPERATING INSTRUCTIONS ... 14 Using the water softening system ... 15 Using the rinse-aid and detergent dispensers ... 17 4.2.1 Adding the rinse-aid ... 18 4.2.2 Adjusting the rinse-aid dispenser system ...
  • Page 19 Rev 0.0...

  • Page 20: Introduction

    INTRODUCTION INTRODUCTION Thank you for choosing one of our products. To use this dishwasher correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to all your appliance’s functions. The texts are easy to understand and are complete with detailed illustrations.
  • Page 21 Symbols used in this manual (see tab. 1-01) DANGER. This symbol highlights information and warnings which, if not observed, may compromise personal safety or damage the appliance. DANGER OF ELECTROCUTION. This symbol highlights information and warnings of an electrical nature which, if not observed, may compromise personal safety or damage the appliance.

  • Page 22: Important Safety Instruction

    THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLI- ANCE: IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER (INCLUDING THE “INSTALLATION” AND “DESCRIP- TION OF CONTROLS” MANUALS, IF ATTACHED). BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL.
  • Page 23 DAMAGE TO PERSONS OR PROPERTY RESULTING FROM THE FAILURE TO EARTH THE APPLIANCE OR FROM A DE- FECTIVE EARTH CONNECTION. ALWAYS SWITCH OFF THE DISHWASHER AFTER EACH USE TO AVOID WASTING ELECTRICITY. IN THE EVENT OF A FAULT, DISCONNECT THE DISHWASHER FROM THE ELECTRICAL POWER SUPPLY AND SHUT OFF THE WATER TAP.
  • Page 24 THE WORK PROGRAM AND THEN KEEP THE DETERGENT OUT OF THE REACH OF CHILDREN. THIS DISHWASHER MUST BE USED BY ADULTS. USE BY PER- SONS WITH REDUCED MENTAL AND/OR PHYSICAL CAPABILI- TIES IS ONLY PERMITTED UNDER THE SUPERVISION OF A PER- SON RESPONSIBLE FOR THEIR SAFETY.
  • Page 25 SUCH AS DISPOSABLE CUTLERY OR PLATES, AS THESE MAY BECOME DEFORMED. DO NOT WASH OBJECTS IN PLASTIC UN- LESS THEY ARE MARKED “DISHWASHER PROOF” OR THE LIKE. FOR UNMARKED OBJECTS, FOLLOW THE INSTRUCTIONS OF THE MANUFACTURER; IF NO INFORMATION IS AVAILABLE, DO NOT WASH THESE OBJECTS IN THE DISHWASHER.
  • Page 26 THE RACK. POSITION SHARP/POINTED OBJECTS SO AS TO PREVENT THEM FROM DAMAGING THE DOOR GASKETS. DO NOT OPERATE THE DISHWASHER UNLESS ALL THE OUTER PANELS HAVE BEEN POSITIONED CORRECTLY. DO NOT TAMPER WITH THE DISHWASHER CONTROLS. AQUASTOP MODELS; THE AQUASTOP DEVICE PREVENTS FLOODING IN THE EVENT OF A WATER LEAK.
  • Page 27 THE PLUG OR TURN OFF THE MULTI-POLE SWITCH. REMOVE THE WASHING COMPARTMENT DOOR AND DISCON- NECT THE MAINS POWER SUPPLY WHEN REMOVING THE OLD DISHWASHER FOR MAINTENANCE OR DISPOSAL. THE SYMBOL ON THE PRODUCT, OR ON THE DOCUMENTS ACCOMPANYING THE PRODUCT, INDICATES THAT THIS APPLI- ANCE MAY NOT BE TREATED AS HOUSEHOLD WASTE.

  • Page 28: Installation And Hook-Up

    NATIONAL ELECTRIC CODE; IN CANADA THE CANADIAN ELEC- TRIC CODE C22.1 - LATEST EDITION/PROVINCIAL AND MUNICI- PAL CODES AND/OR LOCAL CODES. BUILDING-IN A DISHWASHER UNDERNEATH A CERAMIC HOB IS ABSOLUTELY FORBIDDEN. A DISHWASHER CAN BE BUILT-IN UNDERNEATH A CONVENTIONAL HOB PROVIDED THERE IS NO...
  • Page 29 INSTALLATION INSTRUCTIONS CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE AP- PLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR. IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT REPLACED BY THE MANUFACTURER OR AN AUTHORIZED TECH- NICAL SERVICE CENTRE.
  • Page 30 INSTALLATION INSTRUCTIONS DO NOT USE EXTENSION CORDS, ADAPTORS OR SHUNT CON- NECTIONS IN ORDER TO AVOID THE POSSIBILITY OF OVERHEAT- ING OR BURNING, WITH CONSEQUENT FIRE HAZARD. Rev 0.0...

  • Page 31: Operating Instructions

    BEFORE STARTING TO USE THE APPLIANCE, MAKE SURE YOU HAVE READ AND UNDERSTOOD ALL THE WARNINGS CONTAI- NED IN CHAPTER 2 “IMPORTANT SAFETY INSTRUCTION”. Once the dishwasher has been correctly installed, prepare for use as follows: • adjust the water softening system;...

  • Page 32: Using The Water Softening System

    (ref. A fi g. 4-01) by turning it anticlockwise and pour in the salt using the funnel (ref. A fi g. 4-02) supplied with the dishwasher. Before replacing the cap (ref. A fi g. 4-01), remove any salt residues from around the opening.
  • Page 33 • When using the dishwasher for the fi rst time, in addition to the salt it is also necessary to add one liter of water to the container. • Each time the salt container is refi lled, make sure that the cap (ref. A fi g.

  • Page 34: Using The Rinse-Aid And Detergent Dispensers

    USER INSTRUCTIONS Using the rinse-aid and detergent dispensers The detergent and rinse aid dispensers are situated on the inner part of the door: the detergent dispenser (ref. A fi g. 4-03) is on the left, and the rinse- aid dispenser (ref. B fi g. 4-03) is on the right. WITH THE EXCEPTION OF THE SOAK PROGRAM, BEFORE EV- ERY WASHING CYCLE IT IS NECESSARY TO ADD THE REQUIRED AMOUNT OF DETERGENT TO THE DETERGENT DISPENSER.

  • Page 35: Adding The Rinse-Aid

    4.2.2 Adjusting the rinse-aid dispenser setting The rinse-aid dispenser can be set to one of 6 different levels. The dishwasher is factory set for medium water hardness (selector set to “3”). To change the setting, turn the dispenser selector (ref. c fi g. 4-04) to the desired position: the amount of rinse-aid dispensed is proportional to the position of this selector.

  • Page 36: Adding The Detergent

    ATIONS OCCURS, SEEK MEDICAL ASSISTANCE IMMEDIATELY. PREVENT CHILDREN FROM COMING INTO CONTACT WITH DE- TERGENT; KEEP THEM AWAY FROM THE DISHWASHER WHEN THE DOOR IS OPEN AS IT MAY CONTAIN DETERGENT RESIDUES. FILL THE DISHWASHER JUST BEFORE STARTING THE WASHING CYCLE AND THEN KEEP THE DETERGENT OUT OF THE REACH OF CHILDREN.
  • Page 37 Controls” manual), extra detergent must be placed in the cavity (ref. A or B fi g. 4-06, depending on models). • Only use dishwasher-specifi c detergents. For optimal washing results it is important to use a good quality detergent. •...

  • Page 38: General Warnings And Recommendations

    WASHER. General warnings and recommendations Before using the dishwasher for the fi rst time, it is advisable to read the follow- ing recommendations concerning dish types to be washed and their loading. There are generally no constraints on the washing of domestic dishes, but in certain cases it is necessary to take their characteristics into account.
  • Page 39 • Decorated items: the decorated objects available on the market are gener- ally able to withstand washing in the dishwasher, although the colors may fade after a great many washes. If in doubt as to the fastness of the col- ors, it is advisable to wash just a few items at a time for approximately one month.

  • Page 40: Using The Racks

    USER INSTRUCTIONS Using the racks The dishwasher has a capacity of 10 place-settings, including serving dishes. Examples of loading 10 place-settings in the upper rack (see fi g. 4-07) and in the lower rack (see fi g. 4-08) are shown below; move the upper rack to its bottom position when loading in this way.

  • Page 41: Lower Rack

    USER INSTRUCTIONS 4.4.1 Lower rack The lower rack receives the full force of the lower spray arm, and should there- fore be used for the “toughest” items with a heavier degree of soiling. All types and combinations of loads are permitted, provided that the dishes, pots and pans are arranged with all the soiled surfaces exposed to the water jets coming from the bottom.
  • Page 42 USER INSTRUCTIONS Loading the lower rack (see fi g. 4-10) Carefully load fl at plates, soup plates, dessert and serving dishes, position- ing them vertically. Pots, pans and their covers must be loaded upside down. When loading soup plates and dessert bowls, be sure to leave a gap between them.

  • Page 43: User Instructions

    The dishwasher is complete with two cutlery baskets, which means that one of them can be removed, freeing space in the bottom rack, if there is not much cutlery to be washed.

  • Page 44: Upper Rack

    USER INSTRUCTIONS 4.4.3 Upper rack (vedi fi g. 4-12, 4-13) It is recommended to load the upper rack with small- or medium-sized items such as glasses, small plates, tea or coffee cups, shallow bowls and light objects made from heat resistant plastic. If the upper rack is used in the lowermost position, it can also be loaded with serving dishes, provided they are only slightly soiled.
  • Page 45 USER INSTRUCTIONS Loading the upper rack (vedi fi g. 4-14) Load plates facing forward; cups, bowls etc. must always be facing downwar- ds. The left-hand side of the rack can be loaded with two layers of cups and glasses. The right-hand side can be fi lled with plates and side-plates, fi tted upright into the supports provided.

  • Page 46: Adjusting The Upper Rack

    • pull out the right-hand rack guide. Release the corresponding stop (ref. A fi g. 4-15) by turning it 90° towards the outside of the dishwasher; • pull out the left-hand rack guide and release the corresponding stop, just as you did for the right-hand rack guide;...

  • Page 47: Cleaning And User-Maintenance

    NEVER USE ABRASIVE AND/OR CORROSIVE DETERGENTS TO CLEAN THE APPLIANCE. Clean the outer surfaces and door-lining of the dishwasher regularly using a soft cloth moistened with a neutral detergent (not abrasive and/or corrosive) suitable for painted surfaces. Clean the door gaskets with a damp sponge.

  • Page 48: Cleaning The Water Intake Fi Lter (Only Some Models)

    USER INSTRUCTIONS Cleaning the water intake fi lter (only some models) The water intake fi lter (ref. B fi g. 5-01) located at the outlet of the water supply tap needs to be cleaned periodically. After having closed the water supply tap, unscrew the end (ref.
  • Page 49 • • • • • • • USER INSTRUCTIONS Fig. 5-02 Fig. 5-03 Fig. 5-04 Rev 0.0...

  • Page 50: Cleaning The Fi Lter Unit

    USER INSTRUCTIONS Cleaning the fi lter unit • Periodically inspect the fi lter unit (ref. A fi g. 5-05) and, if necessary, clean it under running water (at room temperature), using a stiff brush. To remove the fi lter, grip the handle, turn anticlockwise and lift upwards; •...

  • Page 51: General Warnings And Recommendations For Correct Maintenance

    • It is essential to thoroughly clean the fi lters according to the above in- structions: the dishwasher cannot function if the fi lters are clogged. • Carefully replace the fi lters in their seats, to avoid damaging the wash pump.

  • Page 52: Troubleshooting Minor Problems

    In some cases it is possible to remedy minor problems by referring to the fol- lowing instructions: If the program fails to start, check that: • the dishwasher is connected to the electrical power supply; • there is no power failure; •...
  • Page 53 If the dishes fail to dry or remain dull, check that: • there is rinse aid inside the special container; • the rinse-aid dispenser setting is correct; • the detergent used is of good quality and has not lost its effectiveness (for example, through incorrect storage, with the box left open).

  • Page 54: Technical Data

    USER INSTRUCTIONS TECHNICAL DATA (SEE TAB. 6-01) Width Depth measured fl ush with the outer edge of the control panel Height Capacity Water supply pressure Electrical characteristics Rev 0.0 44.7 cm ÷ 44.9 cm (17 - 19/32” ÷ 17 - 43/64”) 55 cm (21 - 21/32”) from 82 to 87 cm (from 32 - 9/32”...
  • Page 55 Contents INTRODUCTION ... 3 SAFETY INFORMATION ... 5 INSTALLATION MATERIAL ... 8 Kit supplied with dishwasher (models sta_4645/sta_8743) ... 9 Kit supplied with dishwasher (models pla_8743) ... 10 DIMENSIONS OF DISHWASHER ... 11 INSTALLATION AND HOOK-UP ... 12 Leveling ... 13 5.1.1...
  • Page 56 Rev 0.0...

  • Page 57: Introduction

    INTRODUCTION INTRODUCTION Thank you for choosing one of our products. To install this dish- washer correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to installation of the appliance. The texts are easy to understand and are complete with detailed illustrations.

  • Page 58: Symbols Used In This Manual

    Symbols used in this manual DANGER. This symbol highlights information and warnings which, if not observed, may compromise personal safety or damage the appliance. DANGER OF ELECTROCUTION. This symbol highlights information and warnings of an electrical nature which, if not observed, may compromise personal safety or damage the appliance.

  • Page 59: Safety Information

    WARNINGS SAFETY INFORMATION THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE AND MUST THEREFORE BE KEPT INTACT TOGETHER WITH THE MACHINE. BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. INSTAL- LATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN, IN COMPLIANCE WITH THE REGULATIONS IN FORCE.
  • Page 60 ANCE MUST BE INSTALLED AND CONNECTED IN ACCORDANCE WITH THE INSTRUCTIONS PROVIDED BY THE MANUFACTURER OR BY A QUALIFIED TECHNICIAN. DO NOT OPERATE THE DISHWASHER UNLESS ALL THE OUTER PANELS HAVE BEEN POSITIONED CORRECTLY. IMMEDIATELY AFTER INSTALLATION, BRIEFLY TEST THE APPLI- ANCE FOLLOWING THE INSTRUCTIONS INDICATED BELOW.
  • Page 61 WARNINGS DO NOT USE EXTENSION CORDS, ADAPTORS OR SHUNT CON- NECTIONS IN ORDER TO AVOID THE POSSIBILITY OF OVERHEAT- ING OR BURNING, WITH CONSEQUENT FIRE HAZARD. MANUFACTURER DECLINES RESPONSIBIL- ITY FOR DAMAGE TO PERSONS, ANIMALS OR PROPER- TY RESULTING FROM FAILURE TO OBSERVE THE ABOVE PRECAUTIONS, FROM TAMPERING WITH EVEN A SINGLE COMPONENT OF THE APPLIANCE, OR FROM THE USE OF UNORIGINAL SPARE PARTS.

  • Page 62: Installation Material

    INSTALLATION MATERIAL To install the dishwasher correctly, the following materials are required: • Phillips screwdriver (ref. A fi g. 3-01); • spirit level (ref. B fi g. 3-01); • tape measure (ref. C fi g. 3-01); • compass saw (ref. D fi g. 3-01);...

  • Page 63: Kit Supplied With Dishwasher (Models Sta_4645/Sta_8743)

    8 screws for securing the door panel hooks (ref. E fi g. 3-02); • 2 screws for securing the door (ref. F fi g. 3-02); • 2 screws for fi xing the dishwasher to the adjacent walls (ref. G fi g. 3-02); • 2 screw caps (ref. H fi g. 3-02). •...

  • Page 64: Kit Supplied With Dishwasher (Models Pla_8743)

    8 screws for securing the door panel hooks (ref. E fi g. 3-03); • 2 screws for securing the door (ref. F fi g. 3-03); • 2 screws for fi xing the dishwasher to the adjacent walls (ref. G fi g. 3-03); • 2 screw caps (ref. H fi g. 3-03). •...

  • Page 65: Installation Instructions

    STA8743 33-55/64” ÷ 35- 55/64” 86 cm ÷ 91 cm STA8614X 33-55/64” ÷ 35- 55/64” 82 cm ÷ 87 cm STA4645 32-9/32” ÷ 34-1/4” 86 cm ÷ 91 cm PLA8743X 33-55/64” ÷ 35- 55/64” 86 cm ÷ 91 cm PLA68XU 33-55/64”...

  • Page 66: Installation And Hook-Up

    The sides and rear of the appliance can lie against kitchen units or walls. If the dishwasher is installed next to a heat source, separate it with a heat insulating panel in order to prevent overheating and malfunctions.

  • Page 67: Leveling

    (cutting hazard). Covers are available as accessories from specialized retailers or from the Technical Service Centre. • To build in the dishwasher, purchase the ers or from the Technical Service Centre. Leveling 5.1.1 Mounting the feet (only for some models) Turn the appliance upside-down (see fi...

  • Page 68: 5.1.2 Levelling The Appliance

    5.1.2 Levelling the appliance Level the appliance using the relative adjustable feet (e.g.: ref. A fi g. 5-02); use an open-ended wrench to rotate the feet until the dishwasher is perfectly level. Some models are fi tted with just one rear foot which can be adjusted with a screw located at the bottom front of the appliance (ref.

  • Page 69: Connections

    INSTALLATION INSTRUCTIONS Connections Install the dishwasher so as to allow ease of access to the electrical and hy- draulic connections through the adjacent unit. These connections must never be behind the dishwasher. The inlet and drain hoses can be pointed in all directions. make sure that they are not bent, crushed or too tight.

  • Page 70: Connecting To The Water Supply

    Make sure there area no rough edges that could damage the power cord or hoses. If the dishwasher is installed in a metal unit protect the edge of the through hole for the hoses and power cord with a gasket. Do not use exten- sion cords when making the electrical connection as these do not guarantee safety.

  • Page 71: 5.2.1.1 Connecting To The Water Tap

    For models fi tted with ACQUASTOP (ref. C fi g. 5-06) the fi lter is already present in the threaded ring nut. The dishwasher can be fi lled with water at a temperature of less than 60°C (140°F).
  • Page 72 INSTALLATION INSTRUCTIONS Do not cut the inlet hose (see fi g. 5-07). If the hose is cut, the dishwasher will not work, water will leak and you may be injured. If the hose is too long, wind it up tidily and place it behind the appliance.

  • Page 73: 5 .2.1.2 Connecting The Drain Hose

    INSTALLATION INSTRUCTIONS 5 .2.1.2 Connecting the drain hose Connecting to a drain Insert the relative hose into a drain with a minimum diameter of 4 cm (1-37/64”) (ref. A fi g. 5-09); alternatively, place the hose on the sink (ref. B fi g. 5-09) using the supplied hose support (see fi...
  • Page 74 ON WHICH THE DISHWASHER WILL BE INSTALLED. Connect the dishwasher drain hose (ref. A fi g. 5-11) to the “T” union (ref. B fi g. 5-11) of the drain circuit using a 38 to 50 mm (1-1/2 to 2”) screw clamp* (ref.
  • Page 75 Remove the cover of the waste disposal unit (ref. A fi g. 5-12). Connect the dishwasher drain hose (ref. B fi g. 5-12) to the air gap (ref. C fi g. 5-12) using the wide spring clamp (ref. D fi g. 5-12); if necessary, cut the end of the dishwasher drain hose (ref.
  • Page 76 ON WHICH THE DISHWASHER WILL BE INSTALLED. Connect the dishwasher drain hose (ref. A fi g. 5-13) to the air gap (ref. B fi g. 5-13) using the wide spring clamp (ref. C fi g. 5-13); if necessary, cut the end of the dishwasher drain hose (ref.
  • Page 77 Remove the cover of the waste disposal unit (ref. A fi g. 5-14). Connect the dishwasher drain hose (ref. B fi g. 5-14) to the waste disposal unit inlet (ref. C fi g. 5-14), using the wide spring clamp (ref. D fi g. 5-14).

  • Page 78: Grounding Instructions

    5 .2.2 Electrical connections and warnings CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE AP- PLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR. IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT REPLACED BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SERVICE CENTRE.

  • Page 79: Commissioning

    5.3.1 Installation procedure Clean the underneath of the worktop lying over the dishwasher door (see fi g. 5-15) and apply the steam guard, as shown in fi g. 5-16 adhesive guard is applied; see fi g. 5-17 if the steel guard is protects the worktop from steam and condensation when the door of the dish- washer is opened at the end of the washing cycle.
  • Page 80 Push the dishwasher into position, taking care not to twist or crush the power cord or hoses (see fi g. 5-18). TWO PEOPLE WEARING SAFETY GLOVES ARE NEEDED TO PUSH THE DISHWASHER INTO PLACE. INSTALLATION INSTRUCTIONS Fig. 5-16 Fig. 5-17 Fig.

  • Page 81: Procedure For Mounting The Door Panel (Models Sta_4645/Sta_8743)

    INSTALLATION INSTRUCTIONS 5.3.2 Procedure for mounting the door panel (models sta_4645/sta_8743) Mount the door panel. Place the template on the inner surface of the panel, centering it along the up- per side and matching up the reference locators (ref. A fi g. 5-19); mark the po- sition of the door hooks with a pencil (see fi...
  • Page 82 Drill holes for the panel handle using a drill with a suitable bit. Use the screw- driver to secure the door handle before hooking the panel to the dishwasher (see fi g. 5-21). N.B.: the screws are not supplied. Insert the door spacers contained in the accessory bag (see fi g. 5-22).
  • Page 83 INSTALLATION INSTRUCTIONS Attach the door panel: fi t the hooks into their slots on the dishwasher and allow the panel to slide downwards and slip in to place (see fi g. 5-23). Secure the door to the panel with the supplied screws. The panel must have a minimum thickness of 20 mm (25/32”) (see fi...
  • Page 84 Make sure the dishwasher door, complete with panel, opens comfortably and that the base plate (ref. A fi g. 5-25) does not prevent it from opening fully. If the base plate prevents the door from opening, mark out the section to remove (see fi...

  • Page 85: Procedure For Mounting The Door Panel (Models Pla_8743)

    INSTALLATION INSTRUCTIONS 5.3.3 Procedure for mounting the door panel (models pla_8743) Mount the door panel. Place the template on the inner surface of the panel, centering it along the up- per side and matching up the reference locators (ref. A fi g. 5-27); mark the po- sition of the door hooks with a pencil (see fi...
  • Page 86 If a gap is created between the control panel and the door panel (ref. A fi g. 5-29), use the supplied strips (ref. B fi g. 5-29) to fi ll it. The number of strips depends on the size of the gap. Position the strips between the control panel and the door panel of the dish- washer (ref.
  • Page 87 INSTALLATION INSTRUCTIONS Attach the door panel: fi t the hooks into their slots on the dishwasher and allow the panel to slide upwards and slip into place (see fi g. 5-31). Secure the door to the panel with the supplied screws. The panel must have a minimum thickness of 20 mm (25/32”) (see fi...
  • Page 88 Make sure the dishwasher door, complete with panel, opens comfortably and that the base plate (ref. A fi g. 5-33) does not prevent it from opening fully. If the base plate prevents the door from opening, mark out the section to remove (see fi...

  • Page 89: Completion Of Installation (All Models)

    INSTALLATION INSTRUCTIONS 5.3.4 Completion of installation (all models) Finish the cut with a fi le (see fi g. 5-35) in order to remove any burrs and/or imperfections. Put back the base plate (see fi g. 5-36) and try to open the dish- washer door fully;...
  • Page 90 Remove the adhesive band on the gasket (see fi g. 5-37). Fig. 5-37 Fix the gasket to the dishwasher, inserting it in the seat on the sides towards the front (see fi g. 5-38), and making sure that the long side of the gasket, the one with the hole for inserting the screw, is attached to the outside of the dish- washer;...
  • Page 91 INSTALLATION INSTRUCTIONS Fig. 5-40 shows the state of the dishwasher after the above operations are performed. Rev 0.0 Fig. 5-39 Fig. 5-40...

  • Page 92: Testing

    INSTALLATION INSTRUCTIONS Tighten the supplied screws with a screwdriver; this operation defi nitively fi xes the dishwasher to the adjacent units; cover the side holes using the supplied plugs (ref. A fi g. 5-41). Fig. 5-41 Testing After installation, test the dishwasher by starting a work cycle. Check for leaks and make sure the appliance does not malfunction.
  • Page 93 444mm (17-15/32) Align with the top edge of the door panel. Aligner au bord supérieur du panneau de la porte. Alinear respecto del borde superior del panel puerta. Alinhe com a borda superior do painel da porta. 444mm (17-15/32) Align with the top edge of the door panel. Aligner au bord supérieur du panneau de la porte.

This manual is also suitable for:

Sta4645u

Table of Contents