Smeg STA4645 Instruction Manual page 86

EN
If a gap is created between the control panel and the door panel (ref. A fi g.
5-29), use the supplied strips (ref. B fi g. 5-29) to fi ll it. The number of strips
depends on the size of the gap.
Position the strips between the control panel and the door panel of the dish-
washer (ref. A fi g 5-30) and fi x them from under the control panel with the
supplied screws (ref. B fi g. 5-30) using a screwdriver. Adjust the strips until a
suitable compromise is reached.
32
INSTALLATION INSTRUCTIONS
B
A
A
Fig. 5-29
B
Fig. 5-30
Rev 0.0