Specifications; Product Specifications - YOKOGAWA 701931 User Manual

Specifications

Product Specifications

1-10
Accuracy is guaranteed at 23 ± 3°C (73°F ± 5°F) after the power has been on
for 30 minutes.
Band width*
Rise Time*
Maximum Continuous Input Range
Maximum Peak Current Value
Output Voltage Rate*
Amplitude Accuracy*
Noise*
Input Impedance
Temperature Coefficient for Sensitivity*
Propagation delay (typical)
Maximum Rated Power 7.2 VAmax (at the maximum continuous input range)
Rated Supply Voltage
Operating Temperature and Humidity Range
Storage Temperature and Humidity Range
Location for Use
Effect of External Magnetic Fields
Diameter of Measurable Conductors
Guaranteed accuracy period
Cable Lengths
External Dimensions
Mass
Accessories
* In conjunction with a waveform measuring instrument with an input
impedance of 1 MΩ ± 1%
DC to 2 MHz (–3 dB)
(Typical characteristics shown in the next page, Fig.1)
175 ns or less
500 A (Derating according to frequency shown in the next
page, Fig.2)
Non-Continuous 700 A
0.01 V/A
To 500 A: ±1%rdg. ±5 mV
500 A to 700 Apeak: ±2% rdg.
(DC, and 45 to 66 Hz)
Equivalent to 25 mArms or less (for 20 MHz band measuring
instrument)
(Typical characteristics shown in the next page, Fig.3)
±2% or less (within a range of 0 to 40°C or 32 to 104°F when
inputting 50 Hz, 500 A)
57 ns
±12 V ±0.5 V
0 to 40°C (32 to 104 °F), 80% RH or less (no condensation)
–10 to 50°C (14 to 122°F), 80% RH or less (no condensation)
Indoor, altitude up to 2000 m (6562 feet)
Equivalent to a maximum of 800 mA (in a DC or 60 Hz,
400 A/m magnetic field)
φ 20 mm
1 year (up to 10000 open and close operations)
Sensor Cable: Approx. 2 m (78.7").
Power Supply Cable: Approx. 1 m (39.4")
Sensor:
Approx. 176 (W) × 69 (H) × 27 (D) mm.
Approx. 6.93" (W) × 2.72" (H) × 1.06" (D)
Terminator:
Approx. 27 (W) × 55 (H) × 18 (D) mm.
Approx.1.06" (W) × 2.17" (H) × 0.71" (D)
Approx. 520 g.
Approx. 18.3 oz.
User's manual, carrying case
IM 701931-01E