Hyundai NEXO 2019 Owner's Manual page 322

Driving your vehicle
• The driver can select the warning
volume of Blind-Spot Collision
Warning in the Vehicle Settings in
the AVN screen by selecting
→
'Vehicle Settings
Assistance → Warning Volume →
High/Medium/Low'.
For more information refer to the
separately supplied Navigation
manual.
i
Information
If you change the warning volume, the
warning volume of other systems may
change. Always be aware before
changing the warning volume.
5-56
Operating Conditions
The system enters the ready status,
when 'Active assistance' or 'Warning
Only' is selected and the following
Driver
conditions are satisfied:
• Active assistance
1) The Blind-Spot
Avoidance Assist system will acti-
vate when :
- Vehicle speed is between 40
mph and 110 mph (60 km/h and
180 km/h).
- The system detects both of the
lane lines.
- An approaching
detected next to or behind your
vehicle.
2) The Blind-Spot Collision Warning
system will activate when
The vehicle speed is above
approximately 20 mph (30 km/h).
• Warning Only
1) The Blind-Spot Collision Warning
system will activate when :
- The vehicle speed is approxi-
mately 20 mph (30 km/h).
❈The Blind-Spot Collision-Avoidance
Collision- Assist system is not activated.
vehicle is