Maintenance And Care; Trigno Sensors; Recharging Base Station - Delsys TRIGNO User Manual

Maintenance and Care

Trigno Sensors

Trigno sensor are encased in a sealed polycarbonate enclosure.
The following points should be kept in mind when handling the
sensors.
• All sensors should be visually inspected before each use to
• The sensors can be cleaned and sterilized with a damp cloth
• The sensors are completely sealed and are water-resistant.
• The sensor contacts are made of pure silver and are quite
• Handle the sensors with care: do not drop them on the ground
Do not submerge the sensors in any liquid under any
circumstance.
The sensors contain sensitive electronic circuitry. Static
discharges and intense magnetic fields should be avoided to
prevent possible irreparable damage to the sensors.

Recharging Base Station

The Trigno System is designed to provide years of reliable ser-
vice when proper care is followed. While the Base Station enclo-
sure is made of durable plastic, the following points should be
kept in mind when using and handling it:
• The device and its accessories should be visually inspected
16
ensure that no mechanical deterioration has occurred.
and mild detergent, with isopropyl alcohol swabs, or with a
70% isopropyl alcohol solution. Ensure that the sensor con-
tacts remain clean at all times for proper operation.
These can be used on damp skin surfaces and in the presence
of sweat without compromise to safety, sensor integrity or
operation. The sensors should never be completely sub-
merged in any liquid.
soft. Care should be taken to preserve the integrity of these
contacts. Do not scrape or dent these contacts.
or step on them.
before every use to ensure that no mechanical deterioration
has occurred.
Trigno Wireless EMG System User's Guide
TM