Using Emgworks With The Trignotm System - Delsys TRIGNO User Manual

TM
Using EMGworks with the Trigno System
Install EMGworks according to the instructions provided with
the software. Define a Hardware Configuration and an appropri-
ate Test as described in the EMGworks User's Guide. Note that
the sampling rate for Trigno Sensors is fixed 4000 samples/sec
for EMG data and 296 samples/sec for accelerometer data.
When the Trigno Test is initiated, the Trigno System Console
will appear in a separate window. This console monitors the
status of the Base Station and Sensors in real time to give the
User appropriate feedback on battery voltage, number of
dropped frames and makes available sensor settings such as
accelerometer range and transmission channel selection.
Note that the sensor must be turned on and linked to the Base
prior to initiating data acquisition in EMGworks.
13