Trignotm System Components; Wireless Emg Sensor; Sensor Led Indicator Status - Delsys TRIGNO User Manual

Trigno TM System Components

Wireless EMG Sensor

Each Trigno Sensor is equipped with the following features:
• transmission range of 20m
• inter-sensor latency < 500us
• self-contained rechargeable battery
• EMG signal bandwidth 20- 450 Hz
• EMG signal sampling rate of 4000 samples/sec
• EMG baseline noise of 3uV pk-pk
• CMRR > 80dB
• 16-bit EMG signal resolution
• integrated triaxial accelerometer
• software selectable accelerometer sensitivity of
• LED User feedback
• battery charge monitoring and status indicator
• environmentally sealed device
• proven parallel bar technology
• contoured sensor-skin interface for maximum signal stability
• auto shutoff

Sensor LED Indicator Status

Data Streaming
Scanning
Pairing
Pairing Successful
Pairing Unsuccessful
Mode Switch
Firmware Update
Battery Charging
Charging Complete
Charging Error
Sensor Off
Z
X
Status
flashing green, 1 second cycle
alternating green/amber flash, 1 second cycle
Solid Amber, button depressed
Rapid green flashing, button depressed
Rapid red flashing, 5x, button depressed
Rapid green flashing, 3x
Rapid green flashing, 3x
Solid amber, in cradle
Solid green, in cradle
LED off, sensor in cradle, cradle powered up
LED off
Y
LED Behavior
1.5g or 6g
± ±
9