NetComm Videotron 3G36W-V User Manual page 20

Hide thumbs Also See for Videotron 3G36W-V:
Table of Contents

Advertisement

4�2�2�3 PPPoE (ADSL)
Most ADSL/ADSL2+ services use the PPP over Ethernet protocol. Use this if you connect your 3G36W-V to a bridged ADSL modem.
Name
Username/Password
Operation Mode; There are 3 options:
'Keep Alive'
'On Demand'
'Manual'
MAC Clone
Click 'Apply' to save the settings.
4�2�2�4 PPTP
Name
Server IP
User Name/Password
Address Mode
Operation Mode
'Keep Alive'
'On Demand'
'Manual'
Mac Clone
Click 'Apply' to save the settings.
3G38W-V User Guide
20
Description
Type in your PPPoE account username and password.
Keeps the Internet connection alive, does not disconnect.
Only connects to the Internet when there's a connect attempt
O nly connects to the Internet when the 'Connect' button on this page is pressed, and disconnects
when the 'Disconnect' button is pressed.
P lease input the MAC address of your computer here if your service provider only permits computers
with a certain MAC address to access the Internet. If you are using the computer which used to
connect to the Internet via cable modem, you can simply press the 'Default' button to fill the MAC
address field with the MAC address of your computer.
Description
Type in the server IP address assigned by your Internet Service Provider.
Type in the username and password assigned by your provider.
Select Dynamic if your service uses a DHCP server, or select Static and type in the IP address, Subnet Mask and Default
Gateway assigned by your Internet Service Provider.
Keeps the Internet connection alive, does not disconnect.
Only connects to Internet when there's a connection attempt
Only connects to the Internet when the 'Connect' button on this page is pressed, and disconnects when the 'Disconnect'
button is pressed.
Please input the MAC address of your computer here if your service provider only permits computers with a certain MAC
address to access the Internet. If you are using a computer which used to connect to the Internet via a cable modem, you can
simply press the 'Default' button to fill the MAC address field with the MAC address of your computer.
www.netcomm.com.au

Advertisement

Table of Contents
loading

Table of Contents