Setting The Washing Program - Smeg DF614BE Instruction Manual

SETTING THE WASHING PROGRAM

To select the most suitable program for the dishes to be washed refer to
the table below, which indicates the most appropriate program according
to dish type and degree of soiling.
PROGRAM SELECTION TYPE AND GRADE DIRT
SOAK
LIGHT
BIO
NOT VERY DIRTY BUT
(*)
WITH DRY RESIDUALS
NORMAL
SUPER
WITH DRY RESIDUALS
Only run the soak program with half loads.
The HALF LOAD option (5) is available for all programs except the soak program.
(*) Reference program as per EN 50242 standard.
(1) Average power consumption with the softener set on level 2.
(2) The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.
User instructions
PROGRESS
PROGRAM
PANS AND DISHES
IN WAITING OF
Cold prewash
COMPLETING
THE LOAD
Wash at 45°C
Cold rinse
DISHES
NOT VERY DIRTY Rinse at 68°C
Dry
Cold prewash
Wash at 50°C
PANS AND DISHES
Cold rinse
Rinse at 62°C
Dry
Cold prewash
Wash at 65°C
PANS AND DISHES
Cold rinse
DIRTY AND WITH
DRY RESIDUALS
Rinse at 68°C
Dry
Prewash at 45°C
Wash at 70°C
PANS AND DISHES
2 cold rinses
VERY DIRTY AND
Rinse at 70°C
Dry
DURATION CONSUMPTION
MINUTES WATER POWER
(2) LITRES (1) KWh (2)
15' 6 0,03
70' 15 1,15
180' 17 1,08
100' 20 1,40
115' 24 1,77