Setting The Washing Program And Switching On And Off - Smeg STA8614XU Instruction Manual

EN
On/off button
1
Press to power the appliance.
Program indicator lights
2 These show which program is selected and whether there are any faults
(Troubleshooting).
Program selection button
3
Press in sequence to select the required program.
Add salt indicator light (only fi tted on some models)
4
Shows the appliance has run out of salt.
Add rinse aid
5 (only fi tted on some models)
Shows the appliance has run out of rinse aid.
Supplementary program button
6
Press to select one of the fi ve supplementary programs (see table).
Supplementary program indicator light
7
Shows that one of the fi ve supplementary programs will be run (see table).
Sanitation indicator light
8
Shows that the function is active.
Half-load wash button (only fi tted on some models)
9
Press to select the half-load wash option.
Half-load indicator lights (only fi tted on some models)
10 One of the lights shines to show that the half-load wash function has been selected in
the upper or lower rack.
Program delay button
11 (only fi tted on some models)
Press to delay the start of the program up to 9 hours.
12 Display (only fi tted on some models)
2.2 Setting the washing program and switching
on and off
The dishwasher is equipped with a control panel (see fi g. 2-02) which is used
to program the appliance and switch it on and off.
6
USER INSTRUCTIONS
10a 10b
Tab. 2-01
FIG. 2-02
Rev 0.0