Setting The Washing Program And Switching On And Off - Smeg STU8642 Manual

EN
On/off button
1
Press to power the appliance.
Program indicator lights
2
These show which program is selected and whether there are any faults
(Troubleshooting).
Program selection button
3
Press in sequence to select the required program.
Add salt indicator light (only fitted on some models)
Shows the appliance has run out salt.
4
WATER HARDNESS ADJUSTMENT ON INDICATOR LIGHT
The light flashes to indicate that the appliance is in "water hardness
adjustment" mode.
Add rinse aid indicator light (only fitted on some models)
5
Shows the appliance has run out of rinse aid.
Quick time option button
6
Press this button to start one of the quick time programmes (see table).
Quick time programmes indicator light
7
Shows that one of the quick time programmes will be run
Enersave option button
8
Option to reduce energy consumption.
Enersave option light
9
Shows the function is active.
Half load option button
10
Press to select the half load option.
Half load option light
11
Shows the function is active.
Sanitation indicator light
12
Shows that sanitation has been completed (see notes in the programmes
table)
Programme delay button
13
Press to delay the start of the programme up to 9 hours.
14
Information display
2.2
The dishwasher is equipped with a control panel (see fig. 2-02) which is used to pro-
gram the appliance and switch it on and off.
6
USER INSTRUCTIONS
Setting the washing program and switching on
and off
Tab. 2-01
FIG. 2-02