Setting The Washing Program - Smeg SA8211X Instruction Manual

SETTING THE WASHING PROGRAM

To select the most suitable program for the dishes to be washed refer to
the table below, which indicates the most appropriate program according
to dish type and degree of soiling.
PROGRAM SELECTION
SOAK
NORMAL
ECO (*)
ECO
NORMAL
SUPER
Only run the soak program with half loads.
The HALF LOAD (5) and DELAYED START (7) options cannot be used with the soak program.
(*) Reference program as AS/NZS 2007 (NORMAL ECO).
(**) SA 8211X
(***) SA 8211 XWS
Average power consumption with the softener set on level 2.
(1)
(2) The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.
10
User instructions
TYPE AND GRADE DIRT
PANS AND DISHES
AWAITING COMPLETION
OF THE LOAD
PANS AND DISHES NOT
VERY DIRTY BUT WITH DRY
RESIDUALS
PANS AND DISHES DIRTY
AND WITH DRY RESIDUALS
PANS AND DISHES
WITH NORMAL DIRT,
EVEN WITH DRIED-ON
RESIDUES
VERY DIRTY PANS
AND DISHES, EVEN
WITH DRIED-ON RESIDUES
DURATION
PROGRESS
PROGRAM MINUTES
Cold prewash
Cold prewash
Wash at 45°C
Rinse at 45°C 162'***
Dry
Wash at 50°C
Cold rinse
Rinse at 70°C
Dry
Cold prewash
Wash at 65°C
Cold rinse
Rinse at 70°C
Dry
Prewash at 45°C
Wash at 70°C
2 cold rinses
Rinse at 70°C
Dry
CONSUMPTION
WATER POWER
(2) LITRES (1) KWh (2)
15' 6
157'** 13,6**
16***
150' 16
100' 20
115' 24
0,03
0,73
1,45
1,40
1,77