To install batteries
1. Loosen the screw to release the battery
compartment cover. Then, lift the cover off.
(For easier access, press on the top of the
belt clip/stand to hold it out of the way.)
2. Insert 3-AAA batteries into battery
compartment. Position the batteries so
that + and – symbol match markings in
the battery compartment.
Tip: It is easier to install + end of battery
first, then push – end into place.
3. Place the cover back onto the battery
compartment and secure it by tightening
the screw.
Tip: We recommend alkaline batteries for
longer life.
WARNING:
Batteries may explode or leak if not used correctly. Follow all instructions for proper
installation, use and storage.
To Set Up - Parent Unit(s)
For plug-in use
Connect the Parent Unit to the AC adapter and plug
the adapter into an electrical outlet. If desired,
open stand to support unit in an upright position.
IMPORTANT: Use only the AC adapters supplied
with this product. Use of any other adapter(s) could
damage Monitor and would void warranty.
Product is not intended for use by children under
3 years old;
Product must only be used with the
supplied AC adaptor;
AC adaptor is not a toy;
AC adaptor should be regularly examined for
damage to the cord, plug, enclosure or other
parts, and in the event of such damage, it must
not be used until the AC adaptor has been
replaced.
To obtain replacement AC adaptor: please call our
Parent Service Center at 800-704-8697.
5
Need help?
Do you have a question about the True Choice A100 and is the answer not in the manual?
Questions and answers