To Set Up - Child Unit - The First Years True Choice A100 Manual

Digital monitor
Table of Contents

Advertisement

1. Position the Child Unit within 4 to 6 feet of
your child. NEVER position the unit within a
child's reach.
2. Insert the connector on the AC adapter into
the jack on the back of the unit, then plug
the adapter into an electrical outlet.
WARNING:
Do not place Child Unit in crib or attach
to crib or playpen.

To Set Up - Child Unit

For wall mounting (optional)
1. Press the adapter cord into the grooved channel on
2. Securely fasten a #8 "pan" head screw to the wall,
3. Fit the round opening
4. To test that unit is
Do not mount the Child Unit in a location where
the unit or the adaptor cord is within the child's
reach.
4
the back of the unit, making certain to slide it under
the two holding clips.
leaving the screw head protruding by at least 1/4
inch. For best results use a 3/4-inch long screw;
mount in a solid wood panel, or use a screw anchor.
on the wall mount slot
over the screw head,
then slide the unit
down until it is
seated firmly.
securely mounted:
press on its top
and side edges.
WARNING:
#8 "pan" head screw

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the True Choice A100 and is the answer not in the manual?

This manual is also suitable for:

True choice a200

Table of Contents