Identifying Controls - Panasonic TY-TP10E Operating Instructions Manual

This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry
Canada (IC) radio frequency exposure limits.
Accessories
Bluetooth adapter ·······················································<1>
AAA battery,R03 battery ·············································<1>
< > indicates the quantity.

Identifying Controls

Power button
ON/OFF
Indicator lamp
Lights or fl ashes while using or charging to indicate the status of
battery level and Electronic Pen.
• Lights for approx. 2 seconds when turned on, and then blinks
at approx 2-second intervals.
Blinks in red in Electronic Pen 1 operation, and green in
Electronic Pen 2 operation.
• Continuously blinks in red and green alternately during registration.
• Lights intermittently in red and green alternately at approx.
2-second intervals during reconnection.
• Blinks in green for approx. 3 seconds when registration or
reconnection is complete.
• Blinks 5 times consecutively at power-on when the battery
level is low.
6
IC STATEMENT
Indicator lamp
Power button
Press the button once to turn the power on.
Pressing the button approx. 2 seconds or longer
while the power is on will turn the power off.
This is also used when registering the
Electronic Pen on the television. For details
on registration, refer to the Registration page.
( page 8)
(XXXX)