Rc5 Disassembly/Assembly Procedures - Bose Life CD5 Series I Service Manual

RC5 DISASSEMBLY/ASSEMBLY PROCEDURES

1. Enclosure Disassembly
1.1 Slide off the battery compartment door
(5) and remove the batteries.
1.2 While holding the top cover (4) with one
hand, place your fingers from your other
hand in the battery compartment and grasp
the lower part of the bottom cover (3) with
your fingers.
1.3 With your finger tips in the battery
compartment, first pull parallel to the unit
and then pull perpendicular.
1.4 With the catches released at the bottom,
work your fingers up the sides to release
the rest of the catches.
2. Enclosure Assembly
2.1 Lower the bottom cover (3) onto the top
cover (4) so that the bottom cover's lip fits
over the top cover.
Figure 8. Remote Control Assembly Exploded View
5
6
7
9
8
2.2 Press the top cover and the bottom
cover together until they snap into place.
3. PCB Removal
3.1 Lift the PCB (1) straight up. The springs
will come up with the PCB.
4. PCB Replacement
4.1 Lower the PCB (1) into the top cover (4)
so that the springs are in the battery com-
partment.
5. Pad Removal
5.1 The pad (2) is not secured. Grasp a
corner of the pad and lift it out.
6. Pad Replacement
6.1 Lower the pad (2) into the top cover (4)
so that the buttons line up with the holes in
the top cover.
3
10
1
2
4
23