Cisco ASR 14000 Series Management Command Reference page 622

snmp-server location
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server location
To specify the system location for Simple Network Management Protocol (SNMP), use the snmp-server
location command in global configuration mode. To remove the location string, use the no form of this
command.
Syntax Description
system-location
Defaults No system location string is set.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
snmp
Examples
The following example shows how to specify a system location string:
RP/0/RP0/CPU0:Router(config)# snmp-server location Building 3/Room 214
Related Commands Command
snmp-server contact
Cisco ASR 14000 Series Router System Management Command Reference
SMR-620
snmp-server location system-location
no snmp-server location
String indicating the physical location of this device. The maximum string
length is 255 alphanumeric characters.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Sets the system contact string.
SNMP Server Commands on Cisco IOS XR Software
OL-17231-01