Cisco ASR 14000 Series Management Command Reference page 285

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show hw-module fpd
To display field-programmable device (FPD) compatibility for all modules or a specific module, use the
show hw-module fpd command in the appropriate mode.
Syntax Description
location
all
node-id
Defaults No default behavior or values
Command Modes
EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
sysmgr
root-lr
Examples The following example shows how to display FPD compatibility for all modules in the router:
RP/0/RP0/CPU0:Router# show hw-module fpd location all
===================================== ==========================================
Location
============ ======================== ======= ==== ======= ==== =========== ====
0/0/SP
--------------------------------------------------------------------------------
0/0/CPU0
--------------------------------------------------------------------------------
OL-17231-01
show hw-module fpd location {all | node-id}
Specifies the location of the module.
Specifies all modules in the router.
Location of the module in the rack/slot/module notation.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
read
Card Type
YYY-XXXIface
ASR14K-SIP-800
Existing Field Programmable Devices
==========================================
HW
Version Type Subtype Inst
255.254 lc
lc
0.104 lc
lc
lc
Cisco ASR 14000 Series Router System Management Command Reference
show hw-module fpd
Current SW Upg/
Version
rommonA 0 1.43
rommon 0 1.43
fpga 0 2.0
rommonA 0 1.43
rommon 0 1.43
Dng?
No
No
No
No
No
SMR-283