Cisco ASR 14000 Series Management Command Reference page 596

show snmp users
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show snmp users
To display information about the configured characteristics of Simple Network Management Protocol
(SNMP) users, use the show snmp users command in EXEC mode.
Syntax Description
This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
An SNMP user must be part of an SNMP group, as configured using the
Use the show snmp users command to display information about all configured users.
When configuring SNMP, you may see the logging message "Configuring snmpv3 USM user." USM
stands for the User-Based Security Model (USM) for SNMP Version 3 (SNMPv3). For further
information about USM, see RFC 3414, User-based Security Model (USM) for version 3 of the Simple
Network Management Protocol (SNMPv3).
Task ID Task ID
snmp
Examples The following is sample output from the show snmp users command:
RP/0/RP0/CPU0:Router# show snmp users
User name:user1
Engine ID:localSnmpID
storage-type:nonvolatile active
Cisco ASR 14000 Series Router System Management Command Reference
SMR-594
show snmp users
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
SNMP Server Commands on Cisco IOS XR Software
snmp-server user command.
OL-17231-01