Removing the wireless card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
left-side
2
Follow the procedure from step 1 to step 4 in
Procedure
1
Locate the wireless-card slot on the system board. For more information, see
2
Remove the screw (M2x2.5) that secures the wireless card to the system board.
3
Lift the wireless-card bracket off the wireless card.
4
Slide and remove the wireless card from the wireless-card slot.
5
Disconnect the antenna cables from the wireless card.
74
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
cover.
computer. After working inside your computer, follow the instructions
"Removing the power-supply
unit".
"System-board
components".