Removing The Top-Cover Assembly; Prerequisites; Procedure - Dell Alienware Aurora R8 Service Manual

Removing the top-cover assembly

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the left-side
2 Remove the right-side

Procedure

1 Remove the two screws (#6-32 X 1/4") that secure the top cover to the chassis.
2 Disconnect the lighting cable from the top cover.
3 Slide the lighting cable through the slot on the chassis.
4 Starting from the rear, release the tabs on the top cover from the slots on the chassis.
26
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
cover.
cover.
computer. After working inside your computer, follow the instructions