Replacing the 2.5-inch hard drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
Procedure
1
Place the hard drive into the hard-drive carrier and align the tabs on the carrier with the slots on the hard drive.
2
Snap the hard-drive carrier into the hard drive.
3
Slide the hard-drive assembly into the hard-drive cage until it snaps into place.
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
computer. After working inside your computer, follow the instructions
41