Removing The Power-Supply Unit; Prerequisites; Procedure - Dell Alienware Aurora R8 Service Manual

Removing the power-supply unit

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the left-side
2 Remove the right-side
3 Remove the top cover.

Procedure

NOTE: Note the routing of all cables as you remove them so that you can reroute them correctly after you replace the
power supply.
1 Lay the computer on the right side.
2 Slide the power-supply unit cage release latches to the unlock position.
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
cover.
cover.
computer. After working inside your computer, follow the instructions
45