Arrma 4x4 BLX Get Started page 14

Factory Defaults
Steering CH1/Throttle CH2 channels see table. Steering and Throttle trim set to middle/zero
adjustment. Steering Dual Rate at 100% fully clockwise.
CH1-
NOR REV
ST
CH2-
NOR REV
TH
Binding
Remove receiver
box lid
Press and hold
bind button
End Point Adjustment
To enter programming
mode:
Turn steer-wheel fully
Turn steer-wheel left or
Place vehicle off the
ground and switch
on
© 2018 ARRMA RC. A trade name of Horizon Hobby Ltd
Switch on Car
Apply full throttle
right (pull)
Steering End Points
Grip buttons move end
right point
Always Turn off car first and then transmitter to save settings
14
Receiver LED will Switch on
blink
transmitter
Power on Transmitter
Throttle End Points
Apply throttle or
brake
LED stops blinking
Power LED will flash
five times
The grip buttons
adjust the end points