Setting The Contrast; Exiting Basic Settings - SIGMA SPORT Topline BC 1909 HR User Manual

6 THE BASIC SETTINGS
6.10 SETTING THE TOTAl ODO BIKE 1 OR BIKE 2
- +
1909 1909
1 2
n
k Change the display to ODO BIKE 1 or ODO BIKE 2 using the MODE 1 button.
1
k Press the SET button briefly. The first input figure is flashing.
k Set the value using the MODE 2 button (+) or the RESET button (-).
2
k Move to the next figure using the MODE 1 button.
3
k Set the value using the MODE 2 button (+) or the RESET button (-).
4
k Confirm by pressing the SET button. SET OK appears on the display.
5
This is an optional step used carry over mileage from another bike computer.
6.11 SETTING THE TOTAl TRIP TImE BIKE 1 OR BIKE 2
- +
1909 1909
1 2
n
k Change the display to TIME BIKE 1 or TIME BIKE 2 using the MODE 1 button.
1
k Press the SET button briefly. The first input figure is flashing.
k Set the value using the MODE 2 button (+) or the RESET button (-).
2
k Move to the next figure using the MODE 1 button.
3
k Set the value using the MODE 2 button (+) or the RESET button (-).
4
k Confirm by pressing the SET button. SET OK appears on the display.
5
This is an optional step used carry over mileage from another bike computer.
14 www.sigmasport.com
- +
1909 1909 1909
3 4 5
n n
- +
1909 1909 1909
3 4 5
n n
6 THE BASIC SETTINGS

6.12 SETTING THE CONTRAST

-
1909 1909
1 2
n n
k Change the display to CONTRAST using the MODE 1 button.
1
k Press the SET button briefly. Display flashes.
2
k Set the value using the MODE 2 button (+) or the RESET button (-).
3
(1 = weak/3 = strong).
k Confirm by pressing the SET button.
4
SET OK appears on the display.

6.13 EXITING BASIC SETTINGS

k Press the SET button down for 3 seconds in order to stop
entering settings (SETTINGS CLOSE flashes).
k In order to end setting, nothing can be flashing on the screen.
Briefly push SET button to stop digits from flashing.
+
1909 1909
3 4
n
1909
n 3 sec.
BC 1909 HR 15