Advertisement
Comfort
Moonroof
The moonroof controls are on the overhead
console and have a one-touch open and
close feature. To stop its movement during
one-touch operation, press the control a
second time.
Press and release to open the moonroof. The moonroof stops short of the
fully opened position. To open the moonroof fully, press and release the
control again.
Press and release to close the moonroof
.
Press and release to vent the moonroof.
Press to open the sunshade.
The sunshade stops short of its fully opened position for the comfort of rear
passengers. To open the sunshade fully, press the control
again.
Press to close the sunshade.
Memory Function
The memory function allows a one-touch recall of personalized memory features
including the driver seat, power mirrors and power steering column*. Use the
memory controls on the driver door to program and then recall memory positions. To
program a position, switch the ignition on. Adjust the memory features to your desired
positions. Press and hold the desired preset button until you hear a single tone. You
can now use these controls to recall the set memory positions. You can also program
your memory seat to your transmitter. That way, when you unlock your door with the
transmitter, your memory features automatically move into your saved positions.
See the Seats chapter in your Owner's Manual for more details.
14
Ambient Lighting*
To access and adjust:
1.
Press the Settings icon then Ambient Lighting.
2. Touch the desired color.
3. Use the scroll bar to increase or decrease the intensity.
To switch ambient lighting off, press the active color once or drag the active color
all the way down to zero intensity.
Remote Start
Remote start allows you to start the engine from outside your vehicle using
your key.
To start, press
and then press
twice within three seconds. Before driving
your vehicle, you must press the push button ignition switch on the instrument
panel while applying the brake pedal. You can also turn your vehicle off from
outside after a remote start by pressing
once. If your vehicle is equipped
with remote feedback, an LED on the key provides status feedback of
remote start or stop commands. A solid green light means the remote start or
extension was successful while a blinking red light means the remote start or
stop has failed. A solid red light means that the remote stop was successful
and the engine is off. When the system is waiting for a status update from the
vehicle, you will see a blinking green light.
Technology
Auto-Start-Stop*
The system helps reduce fuel consumption by
automatically stopping and restarting the engine
when your vehicle has stopped. The engine restarts
automatically when you release the brake pedal.
You can switch the system off by pressing the Auto-
Start-Stop button located on the center console. The
button illuminates. This only deactivates the system
for the current ignition cycle. Press the button again to
restore Auto-Start-Stop function.
The system automatically enables every time you start
your vehicle if all of the necessary conditions are met.
Please see the Unique Driving Characteristics chapter
of your Owner's Manual for more information.
Adaptive Cruise Control*
Adaptive Cruise Control adjusts your speed to
maintain a set distance between your vehicle and
the vehicle in front of you in the same lane. You can
select from one of four gap settings by pressing
the gap controls on the steering wheel. To set a
cruise speed: switch cruise control on, accelerate
to the desired speed and press the SET- button. An
indicator light, the current gap setting and your set
speed appear in the information display. Press CAN
to cancel cruise control, press the RES+ button to
return to the set speed and gap setting and press
*if equipped
*if equipped
the OFF button or switch off the ignition to turn cruise
Note:
The 360 degree camera system turns off
control off. The system can also bring your vehicle to
when your vehicle is in motion at a low speed,
a complete stop and may resume going forward in
except when in reverse (R).
stop-and-go traffic.
Note:
Keep the star emblem free from snow, ice
Lane Centering* is designed to help keep your
and large accumulations of dirt. If something is
vehicle in the center of the lane by applying
blocking the star emblem from moving, the camera
continuous assistance steering torque input toward
will not deploy.
the lane center on highways. To switch it on press
the
button.
Rear View Camera
Note: Driving aids do not replace the need to watch
The Rear View Camera
where the vehicle is moving and brake
system provides a
when necessary.
video image of the area
behind the vehicle. The
Refer to the Cruise Control chapter in your Owner's
image appears when
Manual for safety information, more details
and limitations.
the transmission is in
reverse (R) and uses a variety of guidelines to alert
360 Degree Camera*
you of your proximity to objects. If your vehicle is
The
button is on the instrument panel and
equipped with the Obstacle Distance Indicator,
allows you to toggle through different camera views.
the system provides an image of your vehicle and
The front and rear cameras have multiple screens
the red, yellow and green sensor zones. For more
that include Normal View with 360, Normal View and
information about the Rear View Camera,
Split View.
please see the
When in park (P), neutral (N) or drive (D), only the front
Owner's
Manual.
images display when you press the button. When in
Note:
Switching on the rear washer also turns on the
reverse (R), only the rear images display when you
rear camera washer.
press the button.
2 0 1 9 N a u t i l u s
Parking Aids
chapter of your
15
Hide quick links:
Advertisement
