Hach DR 2800 User Manual page 92

Free Programming
B.1.1 Entering a New Element of a Measuring Sequence
92
Important Note: Each component of the measurement process
must be entered in the order in which it will be performed.
1. Highlight the Measurement Process line in the data overview
and press .
EDIT
2. Press again and then
EDIT
Content and Definition of the Keys
[Z] Key / Zeroing
1. Press the key to program a zero measurement and press
[Z]
.
OK
2. Press and then
NEW
to enter the wavelength at which the zero measurement is to be
performed and press
3.
Note: The entered measurement sequence is displayed.
Timer Key
1. Press the key to enter any waiting, reaction, or handling
TIMER
times that have to be taken into account. Use the alphanumeric
keypad to enter the time and press
confirm the input.
Note: This time is integrated directly into the measurement process.
Note: The entered measurement sequence is displayed.
[R] Key / Reading
1. Press the key to program a measurement of the substance
[R]
that is to be analyzed and press
2. Press and then
NEW
keypad to enter the wavelength at which the measurement is to
be performed and press
input.
Note: The entered measurement sequence is displayed.
.
NEW
. Use the alphanumeric keypad
ZEROING
Press again to confirm the input.
OK. OK
. Press
OK
.
OK
and use the alphanumeric
READING
. Press again to confirm the
OK OK
again to
OK