Switch And Module Weights And Quantities; Transceiver And Cable Specifications; Switch Power Input Requirements - Cisco Nexus 9348GC-FXP Hardware Installation Manual

Switch and Module Weights and Quantities

Switch and Module Weights and Quantities
Component
Cisco Nexus 9348GC-FXP Chassis
(N9K-C9348GC-FXP)
Fan Module
– Port-side exhaust (blue)
(NXA-FAN-30CFM-F)
– Port-side intake (burgundy)
(NXA-FAN-30CFM-B)
Power Supply module
– 350-W AC port-side exhaust
(blue) (NXA-PAC-350W-PE)
– 350-W AC port-side intake
(burgundy) (NXA-PAC-350W-PI)
– 440-W DC port-side exhaust
(blue) (NXA-PDC-440W-PE)
– 440-W DC port-side intake
(burgundy) (NXA-PDC-440W-PI)

Transceiver and Cable Specifications

To determine which transceivers, adapters, and cables are supported by this switch, see
c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
To see the transceiver specifications and installation information, see
interfaces-modules/transceiver-modules/products-device-support-tables-list.html.

Switch Power Input Requirements

The following table lists the typical amount of power that the switch consumes. It also lists the maximum
amount of power that you must provision for the switch and power supply for peak conditions.
Note Some power supplies have UL listed capabilities that are greater than the maximum power requirements for
a switch. To determine the power consumption characteristics for the switch, use the typical and maximum
requirements that are listed in the following table.
Cisco Nexus 9348GC-FXP ACI Mode Hardware Installation Guide
46
Weight per Unit
14.2 lb (6.44 kg)
—
0.9 lb (0.4 kg)
0.9 lb (0.4 kg)
—
2.64 lb (1.2 kg)
2.64 lb (1.2 kg)
2.64 lb (1.2 kg)
2.64 lb (1.2 kg)
System Specifications
Quantity
1
3
2 (1 for operations and 1 for
redundancy)
https://www.cisco.com/
https://www.cisco.com/c/en/us/support/